VigorPro
5300Vn ²£«~³W®æªí
|
µwÅ餶± |
WAN |
2x 10/100 Base-Tx RJ45 ports |
LAN |
4x 10/100 Base-Tx RJ45 ports |
VoIP |
2-port FXS |
WLAN |
IEEE802.11n |
¨¾¯f¬r¥\¯à |
Scan SMTP, POP3, HTTP, IMAP, FTP |
Scan ZIP / GZIP / BZIP2 |
Scan Encrypted VPN Tunnels |
Automatic Virus Signature Update |
Automatic Alert when Signature
Update Service Expired |
Real-time E-mail / Syslog Alert when
Virus is Detected |
¨¾¤J«I¥\¯à |
Rule-based Detection List |
Pass / Disallow / Reset when
Intrusion is Detected |
Automatic Intrusion Signature Update |
Automatic Alert when Signature
Update Service Expired |
Real-time E-mail / Syslog Alert when
Under Attack |
¨¾©U§£«H¥\¯à |
Real-time Scan SMTP, POP3 |
Automatic Alert when License Expired |
Real-time Syslog Alert when Spam is
Detected |
Multi Type (Graphic, Document, HTML)
Detection |
Single / Double Byte Coding
Detection |
Black / White List |
Âù WAN ¤f |
Outbound Policy-based Load-balance |
Bandwidth on Demand (BoD) |
WAN Connection Fail-over |
SSL VPN |
Up to 30 SSL VPN Tunnels |
SSL Web Proxy |
ºô¸ô¹q¸Ü[VoIP] |
Protocol : SIPv2 (RFC361) , RTP /
RTCP |
12 SIP Registrars |
Supplemental Services |
Call Hold / Retrieve |
Call Waiting |
Call Waiting with Caller ID |
Call Transfer |
Call Forwarding (Always, Busy and No Answer) |
Call Barring (Incoming / Outgoing) |
Do Not Disturb (DND) |
Message Waiting Indicator (MWI) (RFC-3842) |
Hotline |
µL½uºô¸ô
2.4GHZ |
IEEE802.11n Compliant |
Access Point Discovery |
Wireless Distribution System (WDS) |
Wireless LAN Isolation |
Wireless Rate Control |
WEP / WPA / WPA2 Encryption |
Hidden SSID |
Multi-SSID |
Mac Address Access Control |
Wi-Fi Protected Setup (WPS) |
¼s°ìºô¸ô¨ó©w |
DHCP Client |
Static IP |
PPPoE |
PPTP |
BPA |
L2TP *
|
VPN |
Up to 100 VPN Tunnels |
LAN-to-LAN, Teleworker-to-LAN |
Protocol : PPTP / IPSec / L2TP /
L2TP over IPSec |
Encryption : MPPE and Hardware-based
AES / DES / 3DES |
Authentication : Hardware-based MD5
, SHA-1 |
DHCP over IPSec |
IKE Authentication |
Pre-shared Key |
Digital Signature (X.509) |
NAT-Traversal (NAT-T) |
Dead Peer Detection (DPD) |
VPN Pass-through |
¨¾¤õÀð |
Stateful Packet Inspection (SPI) |
CSM |
IM / P2P Applications Blocking |
URL Keyword Filter (Whitelist and
Blacklist) |
GlobalView Web Content Filter (
Powered by ) |
Multi-NAT, DMZ Host, Port
Redirection and Open Port |
Policy-based IP Packet Filter |
DoS / DDoS Prevention |
IP Address Anti-Spoofing |
E-mail Alert and Logging via Syslog |
Bind IP to MAC Address |
Transparent Mode |
ºô¸ôºÞ²z |
QoS |
Guarantee Bandwidth for VoIP |
Class-Based Bandwidth Guarantee by User-defined
Traffic Categories |
DiffServ Code Point Classifying |
4-level Priority for Each Direction (Inbound /
Outbound) |
Bandwidth Borrowed |
Bandwidth / Session Limitation |
ºô¸ô¯S¦â |
DHCP Client / Relay / Server |
Dynamic DNS |
NTP Client |
Call Scheduling |
RADIUS Client |
DNS Cache / Proxy |
UPnP |
Port-based VLAN |
Routing Protocol : Static Routing ,
RIP V2 |
ºô¸ôºÞ²z |
Web-based User Interface (HTTP /
HTTPS) |
Quick Start Wizard |
CLI (Command Line Interface, Telnet
/ SSH *) |
Administration Access Control |
Configuration Backup / Restore |
Build-in Diagnostic Function |
Firmware Upgrade via TFTP / FTP /
Web UI |
Logging via Syslog |
SNMP Management MIB-II |
·Å«× |
Operating : 0¢XC ~ 45¢XC |
Storage : -25¢XC ~ 70¢XC |
·Ã«× |
10% ~ 90% (Non-condensing) |
³Ì¤j®ø¯Ó¥\²v |
10 Watt |
¤Ø¤o |
L240.96 * W165.07 * H43.96 (mm) |
¹q·½ |
DC 15V / 1.34A |