Tower Model (With LCD Display) |
VGD-6000 |
VGD-8000 |
VGD-10000 |
INPUT |
Capacity (VA) |
6000VA |
8000VA |
10000VA |
Capacity (W) |
4200W |
5600W |
7000W |
Voltage |
¡@
208V/220V/230V/240V
|
Voltage / Range
|
Load Capacity
|
Voltage / Range
|
Load Capacity
|
120 ~ 139V
|
0 ~ 40%
|
180 ~ 276V
|
0~100%
|
140 ~ 159V
|
0 ~ 70%
|
160 ~ 276V
|
0 ~ 100%
|
|
Frequency |
50 / 60 Hz Auto Sensing |
OUTPUT |
Voltage (on battery) |
208V, 220V, 230V, 240V +/-2% (Selectable Output
Voltage) |
Frequency (on battery) |
50 / 60 Hz +/-0.5% |
Transfer Time |
0 ms |
Overload Recovery |
Auto transfer to UPS |
High Efficiency Mode (AC to AC) |
> 97 % |
> 97% |
UPS Design Technology |
On-Line / Fully digitized microprocessor
controlled |
Output Wave Form |
Sinewave |
Harmonic Distortion |
< 3% of T.H.D. at linear load |
Crest Factor |
3 : 1 |
PROTECTION & FILTERING |
Surge Protection |
IEEEC61000-4-5 Level 3 |
Overload Protection |
125% for 1 minute and 150% for 10
seconds(On-line) 130% for 10 minute and 150% for 1.5
seconds(On-battery) |
Short Circuit Protection |
UPS output cut off immediately or input fuse /
circuit breakerprotection |
SYSTEM
DISPLAY / WARNING |
Visual Display (LED Model) |
UPS on(green), line-mode(green), battery
mode(yellow), bypass(yellow), fault(red) |
Visual Display (LCD Model) |
Input / output voltage, input / output frequency,
on-line mode, back up mode, battery capacity, load level |
Audible Alarm (Battery Back-Up) |
Beep every 5 sec |
UPS Fault |
Continuous beeping sound and LCD display |
Communication |
RS-232 Serial Port and USB |
BATTERY |
Type |
Sealed, maintenance-free lead acid batteries |
DC Voltage (V) Battery (Tower ) |
240V / 12V7AH
x 20 |
240V / 12V7AH
x 20 |
240V / 12V9AH
x 20 |
Typical Recharge Time to 90% Full |
4 hours |
Management |
Self-test, adjustable battery transfer points and
alarm settings |
Battery Protection |
Cut off without draining any current when battery
is low |
Cold Start (DC Start) |
YES |
Back Up Time (Tower Model) |
4~7 mins Full load
10~18 mins Half Load |
4~7 mins Full load
10~18 mins Half Load |
PHYSICAL |
Input lnlet |
Hardwire |
Receptacles |
Hardwire |
Tower Dimensions
W/O ISO
mm (inch) WxDxH |
257 x 590 x 570
(10.1"x23.2"x22.4") |
257 x 690 x 715
(10.1"x27.2"x28.1") |
257 x 690 x 715
(10.1"x27.2"x28.1") |
Net Weight kg (lb)
Tower w/o ISO |
86.0 Kg (189.2) |
112 Kg (246.4) |
112 Kg (246.4) |
Shipping Weight kg (lb)
Tower w/o ISO |
106.0 Kg (233.2) |
139.0 Kg (305.8) |
139.0 Kg (305.8) |
Tower Dimensions
With ISO
mm (inch) WxDxH |
257 x 590 x 700
(10.1"x23.2"x27.6") |
342 x 690 x 715
(13.4"x27.1"x28.1") |
342 x 690 x 715
(13.4"x27.1"x28.1") |
Net Weight kg (lb)
Tower with ISO |
123 Kg (270.6) |
178 Kg (391.6) |
178 Kg (392.1) |
Shipping Weight
Tower with ISO |
145 Kg (319) |
210 Kg (462) |
210 Kg (462.6) |
ENVIRONMENT |
Operating Temperature |
0 - 40 deg C / 32 ~ 104 deg F |
Storage Temperature |
-20 ~ 50 deg C / -4 ~ 122 deg F |
Altitude |
2,000 meters max |
Audible Noise
(1 meter from surface) |
< 55 dBA |
Relative Humidity |
0 ~ 95% humidity, non-condensing |
CONFORMANCE |
Safety |
CE LVD (230V) |
EMC (EMS / EMI) |
IEC 61000-4, CISPR 22 (230V) |
Warranty policy |
Warranty policy may vary depends on region |