Plustek NVR Slim240:
Hardware Specification
|
Hard Drive Disk (HDD)
|
|
Support 1 x 2.5" SATA HDD |
Video Channels
|
|
Supports up to 4 channels |
Interface
|
|
10 / 100 Mbps Ethernet |
Port
|
|
4 x LAN port for Network cameras
1 x WAN port for NVR |
LED Indicators
|
|
Power status, HDD, WAN
4 x Network camera connection status |
Power Adapter
|
|
Internal power adapter 5VDC 3A |
Operating Environments
|
|
Temperature: (-4¢K to 149¢K) - 20¢XC~ +
65¢XC
Humidity: 20% ~ 80% R.H. |
Energy-saving Design
|
|
Low power consumption (Consumes 8W~10W) |
Safety Regulation |
|
CE, FCC |
Automatic Data Protection
|
|
Supports automatic system startup after
power outage |
Dimensions
|
|
152 (W) x 125 (D) x 45 (H) mm
5.98 (W) x 4.92 (D) x 1.77 (H) inches |
Hardware Net Weight
|
|
800g / 1.76 lbs (HDD included) |
NVR Slim240: Software Application |
Video Display Mode
|
|
Web Browser: Single or 4-CH display
MulitiManager: Single, 4, 8, 16, 64,
128-CH display |
Network-based Camera Compatibilities
¡@
|
|
Axis Communication, Panasonic, Mobotix,
Pelco, Sony, and Vivotek network cameras |
Video Compression Format Recordings
|
|
MJPEG, MPEG4, H.264 |
Video Settings
|
|
Resolution, quality, frame rate,
rotating image, color levels,
date/time/text overlay/stamp. |
Reocording Mode
|
|
Continuous, schedule, alarm/event,
motion, manual, and snapshot |
Buffer for event video storage
|
|
90 seconds per trigger |
Recording Performance
|
|
Up to 60 fps / VGA (640 x 480)
Up to 120fps / CIF (320 x 240)
Up to 120fps / QCIF (QQVGA) (160 x 120)
*recording performance may vary due to
network enviornments
¡@ |
Data Format
|
|
JPEG Snapshots
AVI format for video recordings |
Network Camera Management
|
|
Automatic detection or manual
installation
(all configuration can be managed
through NVR) |
PTZ Controls
|
|
Pan/ Tilt / Zoom available |
Event Management
|
|
Notification using SMTP & FTP |
Users Security
|
|
Three-tier access protection |
|
|
|
System
|
|
Linux |
Communication Protocol
|
|
TCP / IP
HTTP (Web Services)
UPnP (Only for discovering the IGD and
open the virtual server)
SNTP (for Time & Date)
DHCP server
Fixed IP (for Web cams LAN port)
DHCP Client
PPPoE / Fixed (for NVR itself )
TFTP (for upgrade)
CLI (for console Operating
Used for DEBUG & Factory)
SMTP (for Alarm Notification)
FTP Client
Server (for Alarm Notification)
DDNS (Vendor Dependent)
¡@ |
Software AP
|
|
Motion Jpeg Complete recording
Timing schedule
System check
Quad mode for simultaneous recording
Playback
Search camera
Backup
Motion detection
Multiple language support
Alarm triggered FTP
Pre / Post alarm
¡@ |
Language Support
|
|
English/French/German/Japanese/Korean/Simplified
Chinese/Traditional Chinese |
|
|
*Specifications/designs are subject to
change without notice. |