Hardware Specifications |
10/100Mbps Copper Ports |
8 10/100BASE-TX RJ45 Auto-MDI/MDI-X
ports |
Gigabit Copper Ports |
2 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X
ports |
SFP/mini-GBIC Slots |
2 1000BASE-X SFP interfaces, shared with
Port-9 to Port-10 |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
5.6Gbps / non-blocking |
Throughput |
4.16Mpps@64Bytes |
Address Table |
4K entries, automatic source address
learning and ageing |
Shared Data Buffer |
2.75Mb embedded memory for packet
buffers |
Flow Control |
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex |
Maximum Transmit Unit |
1536 Bytes |
Reset Button |
< 5 sec: System reboot
> 5 sec: Factory default |
Dimensions (W x D x H) |
330 x 155 x 43.5 mm, 1U height |
Weight |
1.5kg |
LED |
System:
Power (Green)
10/100BASE-TX RJ45 Interfaces (Port1 to
Port8):
10/100Mbps LNK/ACT (Green)
PoE In-Use (Orange)
10/100/1000BASE-T RJ45 / SFP Interfaces
(Port 9 to Port10):
LNK/ACT (Green)
100/1000 (Green)
PoE Usage
30W, 60W, 90W, 120W (Orange)
¡@ |
Cable |
Twisted-Pair
10BASE-T: 2-Pair UTP CAT. 3, 4, 5, up to 100
meters
100BASE-TX: 2-Pair UTP CAT. 5, 5e up to 100
meters
1000BASE-T: 4-Pair UTP CAT. 5e, 6 up to 100
meters
Fiber-Optic Cable
1000BASE-SX :
50/125£gm or 62.5/125£gm multi-mode fiber
optic cable, up to 550m (varying on SFP
module)
1000BASE-LX :
9/125£gm single-mode fiber optic cable, up to
10/20/30/40/50/60/70/120 kilometers (varying
on SFP module) |
Power Requirements |
100~240V AC, 50/60Hz, 2A |
Power Consumption |
Max. 150 watts / 511BTU |
ESD Protection |
Contact Discharge 8KV DC
Air Discharge 8KV DC
¡@ |
Power over Ethernet |
PoE Standard |
IEEE 802.3af / 802.3at PoE / PSE |
PoE Power Supply Type |
End-span |
PoE Power Output |
Per Port 52V DC, Max. 30.8 watts |
Power Pin Assignment |
1/2(+), 3/6(-) |
PoE Power Budget |
125 watts (max.) |
PoE Ability |
PD @ 7 watts 8 units
PD @ 15.4 watts 8 units
PD @ 30.8 watts 4 units
¡@ |
Layer 2 Functions |
Port Management |
Port disable / enable
Auto-negotiation 10/100/1000Mbps full and
half duplex mode selection
Flow Control disable / enable
Bandwidth Control / Broadcast Storm Control |
Port Status |
Display each port¡¦s speed duplex mode,
link status, flow control status, auto
negotiation status |
Port Mirroring |
TX / RX / Both
Many-to-1 monitor |
VLAN |
802.1Q tagged-based VLAN, up to 30 VLAN
groups, out of 4094 VLAN IDs
Port-based VLAN, up to 10 VLAN groups
MTU VLAN |
QoS |
Allow to assign low / high priority on
each port
First-In-First-Out, All-High-before-Low,
Weight-Round-Robin QoS policy |
Security |
Control MAC address binding
TCP & UDP Filter |
Spanning Tree Protocol |
STP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree
Protocol |
Link Aggregation |
2 groups of 4-Port 10/100BASE-TX trunk
supported
1 group of 2-Port 10/100/1000BASE-T trunk
supported |
DHCP Relay |
DHCP Relay Agent / DHCP Relay Server |
PoE Setting |
PoE Status / PoE Port Setting / PoE
Sequential |
Configuration Back / Restore |
Configuration backup / restore through
Web interface |
IGMP Snooping |
IGMP (v1 / v2) Snooping, up to 32
multicast groups |
Management Functions |
Basic Management Interfaces |
Web browser, SNMP v1 / v2c |
Standards Conformance |
Regulation Compliance |
FCC Part 15 Class A, CE |
Standards Compliance |
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet
IEEE 802.3x Full-duplex flow control
IEEE 802.1Q VLAN
IEEE 802.1p QoS
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus |
Environment |
Operating |
Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
Storage |
Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |