System Unit |
Dimensions |
Height 14.42 in (36.63 cm)
Depth 19.10 in (48.51 cm)
Width 8.29 in (20.82 cm) |
Shipping Dimensions |
Height 20.50 in (54.61 cm)
Depth 26.00 in (66.04 cm)
Width 15.94 in (40.49 cm) |
Weight |
Maximum 106lbs. (48.08 kg) |
Temperature Range* |
Operating 10¢X to 35¢X C (50¢X to 95¢X F)
Non-Operating -40¢X to 60¢X C (-40¢X to 140¢X F)
Storage -20¢X to 60¢X C (-4¢X to 140¢X F)
Maximum Wet Bulb Temperature 30¢X C (86¢X F) |
Relative Humidity** |
Operating 15% to 80%
Shipping 10% to 90%
Storage 10% to 90% |
¡@ |
*All temperature ratings shown are for sea level. An
altitude derating of 1¢XC per 304.8 m (1.8¢XF per 1,000 ft)
to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper
operating limit is 3,048m (10,000 ft)
or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or
30.3 KPa/4.4 psia.
**Storage maximum humidity of 90% is based on a maximum temperature of
45¢XC (113¢XF). Altitude
maximum for storage corresponds to a pressure minimum of 70 KPa. |
Embedded SAS RAID HPE Smart Array p410i Controller |
Disk Drive and Enclosure Interface |
3Gb SAS (Serial Attached SCSI) |
SAS Connectors |
8 internal (SFF8484) x4 wide port connector |
Cache Memory Speed |
DDR2-800 memory provides up to 4.2 GB/s maximum bandwidth |
Server Interface |
X1 5.0Gbps PCIe provides 1GB/s maximum bandwidth. |
SAS Speed |
Eight x 1 3G SAS provides 2400MB/s maximum bandwidth |
Cache Memory |
Four (4) integrated SAS read only 512MB cache, one per HPE Smart
Array p410i SAS
controller |
Logical Drives Supported |
Up to 32 logical volumes |
Maximum Logical Drive Capacity |
Up to 64 logical |
Host Memory Addressing |
64-bit, supporting greater than 4GB server memory space |
RAID Support |
RAID 0 (striping), RAID 1 (mirroring), and 1+0 (Mirroring and
striping) (not supported
with BL8x0c i4 blades) |
Upgradeable Firmware |
Upgradeable Firmware with Recovery ROM features
Online Drive Flash requires 256MB, 512MB, or 1GB cache module |
Embedded NC553i 10 Gb 2-port FlexFabric NICs with
Flex-10 support |
Network Interface |
1000Base-Sx |
Compatibility |
IEEE 802.ip QoS 802.3x flow control, and 802.3ap 10GBase-KR |
Data Transfer Method |
PCI Express, four lanes (x4) |
Network Transfer Rate (Theoretical
Maximum Values) |
1Dual 10Gb parts offer up to 40Gb/s bidirectional theoretical
throughput |
Environmentfriendly Products and Approach |
End-of-life Management and Recycling |
Hewlett Packard Enterprise offers end-of-life Hewlett Packard
Enterprise product
return, trade-in, and recycling programs in many geographic areas. For
trade-in
information, please go to: http://www.hpe.com/info/recycle .To recycle
your product,
please go to: http://www.hpe.com/info/recycle or contact your nearest
Hewlett
Packard Enterprise sales office. Products returned to Hewlett Packard
Enterprise will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment
information for each product type for use by treatment facilities. This
information
(product disassembly instructions) is posted on the Hewlett Packard
Enterprise web
site at: http://www.hpe.com/info/recycle. These instructions may be used
by
recyclers and other WEEE treatment facilities as well as HPE OEM
customers who
integrate and re-sell Hewlett Packard Enterprise equipment. |
Regulatory Compliance |
Regulatory Model Number |
RSVLA-BC11 |
Electromagnetic Interference |
Complies with FCC Rules and Regulations, Part 15, as a Class A
digital device. Manufacturers Declaration to EN55022 Class A, VCCI
Registered, Class A, KC (Korea Certification), BMSI Taiwan, CSA
Certified, compliant with IEC 60950, UL 60950, EN 60950 and EN41003 |
Safety |
UL Listed, CSA Certified, TUV GS Mark compliant with EN 60950 and EN
41003 |
More detailed regulatory documents and certifications |
http://docs.hp.com/en/hw.html |