|
ARC-92xx Series SAS RAID Subsystem |
-SAS-
ARC-9212SS-DR2
ARC-9212SD-DR2
ARC-9216SS-DR3
ARC-9216SD-DR3
ARC-9224SS-DR2
ARC-9224SD-DR2
ARC-9224SS-DR4
ARC-9224SD-DR4 |
-Fibre-
ARC-9212FS-DR2 / ARC-9212FS-QR2
ARC-9212FD-DR2 / ARC-9212FD-QR2
ARC-9216FS-DR3 / ARC-9216FS-QR3
ARC-9216FD-DR3 / ARC-9216FD-QR3
ARC-9224FS-DR2 / ARC-9224FS-QR2
ARC-9224FD-DR2 / ARC-9224FD-QR2
ARC-9224FS-DR4 / ARC-9224FS-QR4
ARC-9224FD-DR4 / ARC-9224FD-QR4 |
-iSCSI-
ARC-9212IS-DR2
ARC-9212ID-DR2
ARC-9216IS-DR3
ARC-9216ID-DR3
ARC-9224IS-DR2
ARC-9224ID-DR2
ARC-9224IS-DR4
ARC-9224ID-DR4 |
| Host Interface |
• SAS-to-SAS
2 x 12Gb/s SAS Ports |
• Fibre-to-SAS
2/4 x 16Gb/s Fibre channels |
• iSCSI-to-SAS
2 x 10Gb/s iSCSI channels |
| JBOD Expansion Port |
One downstream SFF-8644 (4 x 12Gb/s) expansion ports per controller |
| Max. JBOD per RAID Ctrl |
Expansion up to 7 JBODs with 512 HDDs limitation |
| Data Transfer Rate |
Up to 12Gb/s per port |
| RAID_on_Chip |
Dual Core PPC476 1.2 GHz ROC |
| Cache Protection |
One 204-pin SO-DIMM socket for 2GB (default) Unbuffered/Registered ECC module
- up to 4GB or 8GB DDR3-1866, 1RX8, or
- up to 4GB or 8GB DDR3-1600, 2RX8 |
| Operating Systems |
OS Independent |
| Power Supply |
• Dual 595W hot swap, N+1 redundant with PFC
• Supports 100–240VAC input at 47 and 63Hz frequency |
| Cooling |
Two Cooling fans housed within each power supply unit |
| RAID Levels |
0, 1, 10(1E), 3, 5, 6, 30, 50, 60, Single Disk or JBOD |
| RAID Features |
• Multiple RAID 0 and RAID 10(1E) support (RAID 00 and RAID 100)
• Automatic drive insertion/removal detection and rebuilding
• Support RAID 1 - Multi Mirroring and Mirrored Pass-Through Disk
• Multiple RAID selection
• Instant availability and background initialization
• Support global and dedicated hot spare
• Automatic drive insertion/removal detection and rebuilding
• Configurable stripe size up to 1MB
• Support HDD firmware update
• Online array roaming
• Online RAID level/stripe size migration
• Online capacity expansion and RAID level migration simultaneously
• Online volume set growth
• SED (self-encrypting drives) function support
• Support for native 4K and 512 byte sector SAS and SATA devices
• Support intelligent power management to save energy and extend service life
• Support NTP protocol synchronize RAID controller clock over the on board Ethernet port
• Multiple pairs SSD/HDD disk clone function
• SSD automatic monitor clone (AMC) support
|
| Management Monitor |
McRAID Storage Manager
• Web-based GUI management utility
• Graphical-based management utility
• Access terminal menu by telnet via a LAN port
• Field-upgradeable firmware in flash ROM
• Firmware-embedded manager via RS-232 port
Monitors/Notification
• LCD control panel for setup, alarm mute and configuration
• System status indication through LCD, LED and alarm buzzer
• SNMP
• SMTP
• Enclosure management ready (SES over in-band SAS)
|
| Availability and Reliability |
• Redundant controller operation with active/active and fail-over/fail-back function
• Dual-active RAID controller with cache mirroring through dedicated high speed bus
• Automatic synchronization of firmware version in the dual-active mode
• Multi-path & load-balancing support
|
| Operating Temperature |
0 °C to 40 °C |
| Operating Humidity |
10% to 85%, non-condensing |
| Regulatory Certification |
CE, FCC |
| Warranty |
3 years |
| FBM/BBM Support |
ARC-8008-FBN + ARC-8006-2
or
ARC-8008-FBN + ARC-8008-FB |
