Physical Port
-
8 10/100/1000BASE-T Gigabit Ethernet
RJ45 ports with 802.3bt PoE++ Injector function
-
2
100/1000BASE-X SFP slots for SFP type auto detection
-
One RJ45-to-RS232 console interface
for basic management and setup
Industrial Hardened-design
-
Dual power input, redundant power with reverse
polarity protection- DC 48 to 56V input
- Active-active redundant power
failure protection
- Backup of catastrophic power
failure on one supply
- Fault tolerance and resilience
-
DIN-rail and wall-mountable design
-
IP30 aluminum
case
-
Supports 6000V
DC Ethernet ESD protection
-
-40 to 75 degrees C operating
temperature
Digital Input and Digital Output
-
2 Digital Input (DI)
-
2 Digital
Output (DO)
-
Integrate
sensors into auto alarm system
-
Transfer alarm to IP network via
email and SNMP trap
802.3bt Power over Ethernet
-
Complies with IEEE 802.3bt Power over
Ethernet Plus Plus Type-4 PSE
-
Backward compatible with IEEE
802.3at/af PD device
-
Up to 8 ports of IEEE 802.3af/IEEE
802.3at/IEEE 802.3bt PoE++ devices powered
-
Supports PoE power up to 95 watts for
each PoE port
-
Total of 360-watt PoE budget
-
Auto detects powered device (PD)
-
Circuit protection prevents power
interference between ports
-
Remote power feeding up to 100m
-
PoE management features- Total
PoE power budget control
- Per port PoE function enable/disable
- PoE port power feeding priority
- Per PoE port power limit
- PD classification detection
- PoE extend mode control to support
power feeding up to a distance of up to 160 meters
- Intelligent PoE
features- Temperature threshold control
- PoE usage threshold control
Layer 3 IP Routing Features
-
IP dynamic routing protocol supports
OSPFv2
-
IPv4/IPv6
hardware static routing
-
Routing interface provides per VLAN
routing mode
Layer 2 Features
-
High performance of Store-and-Forward
architecture, and runt/CRC filtering eliminates
erroneous packets to optimize the network bandwidth
-
Storm Control
support- Broadcast/Multicast/Unicast
- Supports VLAN- IEEE
802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4095
VLAN IDs
- Supports provider bridging (VLAN
Q-in-Q IEEE 802.1ad)
- Private VLAN Edge (PVE)
- GVRP (GARP VLAN Registration
Protocol)
-
Supports Spanning
Tree Protocol- IEEE 802.1D Spanning Tree
Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree
Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree
Protocol (MSTP), spanning tree by VLAN
-
Supports Link
Aggregation- 802.3ad Link Aggregation Control
Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 4 trunk groups with 4 ports
per trunk group
- Up to 40Gbps bandwidth (duplex
mode)
-
Provides port mirror (many-to-1)
-
Port mirroring
to monitor the incoming or outgoing traffic on a
particular port
-
Loop
protection to avoid broadcast loops
-
Link Layer
Discovery Protocol (LLDP)
-
Compatible
with Cisco uni-directional link detection(UDLD) that
monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at
any point between the two devices
-
Supports
G.8032 ERPS (Ethernet Ring Protection Switching)
-
IEEE 1588 and Synchronous Ethernet
network timing
Quality of Service
-
Ingress Shaper and Egress Rate Limit
per port bandwidth control
-
8 priority
queues on all switch ports
-
Traffic
classification- IEEE 802.1p CoS
- IP TOS/DSCP/IP precedence
- Typical network application
-
Strict priority and Weighted Round
Robin (WRR) CoS policies
-
Supports QoS
and In/Out bandwidth control on each port
-
Traffic-policing on the switch port
-
DSCP remarking
Multicast
-
Supports IPv4 IGMP snooping v1, v2
and v3
-
Supports IPv6
MLD snooping v1 and v2
-
Querier mode
support
-
IPv4 IGMP
snooping port filtering
-
IPv6 MLD
snooping port filtering
-
MVR (Multicast VLAN Registration)
Security
-
Authentication- IEEE 802.1X Port-based/MAC-based
network access authentication
- Built-in RADIUS client to cooperate
with the RADIUS servers
- TACACS+ login users access
authentication
- RADIUS/TACACS+ users access
authentication
- Guest VLAN assigns clients to a
restricted VLAN with limited services
-
Access Control List- IP-based Access Control List
(ACL)
- MAC-based Access Control List
-
Source MAC/IP address binding
-
DHCP snooping
to filter distrusted DHCP messages
-
Dynamic ARP
Inspection discards ARP packets with invalid MAC
address to IP address binding
-
IP Source
Guard prevents IP spoofing attacks
-
IP address access management to
prevent unauthorized intruder
Management
-
IPv4 and IPv6 dual stack management
-
Switch
Management Interfaces- Console and Telnet
Command Line Interface
- HTTP web switch management
- SNMP v1 and v2c switch management
- SSH, TLS, SSL and SNMP v3 secure
access
-
SNMP Management- Four RMON groups (history,
statistics, alarms, and events)
- SNMP trap for interface Link Up and
Link Down notification
-
IPv6 IP address/NTP/DNS management
-
Built-in
Trivial File Transfer Protocol (TFTP) client
-
BOOTP and DHCP
for IP address assignment
-
System
Maintenance- Firmware upload/download via
HTTP/TFTP
- Reset button for system reboot or
reset to factory default
-
DHCP Relay
-
DHCP Option 82
-
DHCP Server
-
User Privilege
levels control
-
Network Time
Protocol (NTP)
-
Network
Diagnostic
-
System
Maintenance- SFP-DDM (Digital Diagnostic
Monitor)
- Cable diagnostic technology
provides the mechanism to detect and report
potential cabling issues
- ICMPv6/ICMPv4 remote ping
-
SMTP/Syslog remote alarm
-
System Log
-
PLANET Smart Discovery Utility for
deployment management