Model |
FGSW-2612PVM |
Hardware Specification |
10/100Mbps Copper Ports |
24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports |
1000Mbps Copper Ports |
2 10/100/1000Mbps RJ-45 Auto-MDI/MDI-X ports |
SFP/mini-GBIC Slots |
2 1000Base-SX/LX/BX, shared with Port-25~Port-26 |
PoE Ports |
12 (port 1 to port 12) |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
8.8Gbps / non-blocking |
Switch Throughput |
6.547Mpps @64Bytes |
Address Table |
8K entries |
Share Data Buffer |
512Kbytes |
Maximum Frame Size |
9K Bytes |
Flow Control |
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
¡@ |
LED |
Power, FAN Alarm
Link / Activity (Green)
PoE In-Use (Amber)
1000 LNK / ACT(Green)
10/100 LNK / ACT(Green)
¡@ |
Reset Button |
< 5 sec: System reboot
> 8 sec: Factory Default
¡@ |
Dimension (W x D x H) |
440 x 265 x 44 mm, 1U height |
Weight |
3.6kg |
Power Requirement |
100~240V AC, 50-60 Hz |
Power Consumption / Dissipation |
150 Watts maximum / 511.5 BTU/hr maximum |
Power over Ethernet |
PoE Standard |
IEEE 802.3af Power over Ethernet / PSE |
PoE Power Supply Type |
End-Span |
PoE Power Output |
Per Port 48V DC, 350mA . Max. 15.4 Watts |
Power Pin Assignment |
1/2(+), 3/6(-) |
PoE Power Budget |
110 Watts |
Max. number of Class 2 PD |
12 |
Max. number of Class 3 PD |
6 |
Layer 2 Function |
Management Interface |
Console, Telnet, Web Browser, SSL, SNMPv1, v2c |
Port Configuration |
Port disable / enable
Auto-Negotiation
10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
¡@ |
Port Status |
Display each ports speed duplex mode, link
status and Flow control status
Auto negotiation status, trunk status
¡@ |
Bandwidth Control |
Ingress / Egress Rate Control
Allow to configure per 128Kbps
¡@ |
VLAN |
IEEE 802.1Q Tag-Based VLAN
Port-Based VLAN
Q-in-Q tunneling
Up to 255 VLANs groups, out of 4041 VLAN IDs
¡@ |
Link Aggregation |
Static Port Trunk
IEEE 802.3ad LACP (Link Aggregation Control Protocol)
Supports 13 groups of 8-Port trunk support
¡@ |
QoS |
Traffic classification based on:
-Port priority
-802.1p priority
-DSCP / TOS field in IP Packet
¡@ |
IGMP Snooping |
IGMP (v1 / v2) Snooping, up to 256 multicast
Groups
IGMP Querier support
¡@ |
Port Mirror |
RX / TX / Both
1-to-1 mirroring
¡@ |
Security |
IEEE 802.1x Port-Based Network access control
Port Security
Static MAC
MAC Filtering
MAC / IP Binding
¡@ |
Access Control List |
IP-Based Layer 3 / Layer 4 ACL
Up to 220 ACL rule entries
¡@ |
SNMP MIBs |
RFC-1213 MIB-II
RFC-2863 Interface MIB
RFC-2665 EtherLike MIB
RFC-1493 Bridge MIB
RFC-2819 RMON MIB (Group 1, 2, 3,9)
RFC-2737 Entity MIB
POWER-ETHERNET-MIB
¡@ |
Standards Conformance |
Regulation Compliance |
FCC Part 15 Class A, CE |
Standards Compliance |
IEEE 802.3: 10Base-T
IEEE 802.3u: 100Base-TX
IEEE 802.3z: 1000Base- SX/LX
IEEE 802.3ab: 1000Base-T
IEEE 802.3x: Flow Control and Back pressure
IEEE 802.3ad: Port trunk with LACP
IEEE 802.1D: Spanning tree protocol
IEEE 802.1w: Rapid spanning tree protocol
IEEE 802.1p: Class of service
IEEE 802.1Q: VLAN Tagging
IEEE 802.1x: Port Authentication Network Control
IEEE 802.3af: Power over Ethernet |