Model |
FGSW-2624SF |
Hardware Specification |
Hardware version |
Version 4 |
100Mbps Fiber Ports |
24 SFP slots |
1000Mbps Copper Ports |
2 10/100/1000Mbps RJ-45 Auto-MDI/MDI-X ports |
SFP/mini-GBIC Slots |
2 1000Base-SX/LX/BX SFP interfaces, shared with
Port-25~Port-26 |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
8.8Gbps / non-blocking |
Switch Throughput |
6.547Mpps@64Bytes |
Address Table |
8K entries |
Share Data Buffer |
512Kbytes |
Flash |
4Mbytess |
DRAM |
16Mbytes |
Maximum Frame Size |
9K Bytes |
Flow Control |
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
¡@ |
LED |
System: Power(Green),
SFP interfaces: LNK /ACT(Green),
Gigabit combo interface: 1000 LNK / ACT(Green), 100 LNK /
ACT(Green),
10 LNK / ACT(Green)
¡@ |
Reset Button |
< 1-3 seconds: System reboot
> 10 seconds: Factory Default
¡@ |
Dimension (W x D x H) |
440 x 200 x 44 mm, 1U height |
Weight |
2.6kg |
Power Requirement |
100~240V AC, 50 / 60Hz |
Power Consumption / Dissipation |
23 Watts maximum / 78 BTU/hr maximum |
Layer 2 Function |
Management Interface |
Console, Telnet, Web Browser, SNMP v1, v2c, SSL |
Port Configuration |
Port disable / enable.
Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable.
Bandwidth control and broadcast storm filter on each port. |
Port Status |
Display each port¡¦s speed duplex mode, link
status, Flow control status and Auto negotiation status |
VLAN |
Port-Based VLAN, up to 26 VLAN groups
IEEE 802.1Q Tagged Based VLAN , 4K VLAN ID, up to 256 VLAN
groups
¡@ |
Spanning Tree |
IEEE 802.1D Spanning Tree
IEEE 802.1w Rapid Spanning Tree
¡@ |
Link Aggregation |
Static Port Trunk
IEEE 802.3ad LACP (Link Aggregation Control Protocol)
Supports 13 groups of 8-Port trunk support
¡@ |
Quality of Service |
Traffic classification based on :
• Port-Based priority
• 802.1p priority,
• IP DSCP / TOS field in IP Packet
¡@ |
IGMP Snooping |
v1 and v2
256 multicast groups and IGMP querier mode
¡@ |
Bandwidth Control |
Per port Ingress / Egress bandwidth control in
steps of 128Kbps |
Port Mirror |
RX / TX / Both |
Security |
802.1x Port-Based Network access control
MAC Limit
Static MAC
MAC Filtering
¡@ |
Access Control List |
Supports up to 220 rule entries |
SNMP MIBs |
RFC-1157 SNMP MIB
RFC-1213 MIB-II
RFC-1215 Trap
RFC-2863 Interface MIB
RFC-1493 Bridge MIB
RFC-2674 Extended Bridge MIB (Q-Bridge)
RFC-1643
¡@ |
Standards Conformance |
Regulation Compliance |
FCC Part 15 Class A, CE |
Standards Compliance |
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000Base-T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.1D Spanning Tree protocol
IEEE 802.1w Rapid Spanning Tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control |
Cable-Fiber-optic cable |
• 50 / 125µm or 62.5 / 125µm multi-mode fiber
cable:
¡@- 100Base-FX : up to 2km
¡@- 1000Base-SX: up to 220 / 550m
• 9 / 125µm single-mode cable, provides long distance for :
¡@- 100Base-FX: up to 10/40/60km (very on fiber transceiver or
SFP
¡@module)
¡@- 1000Base-LX / ZX: 10 / 15 / 20 / 30 / 40 / 50 / 60 / 70 /
120km (very on fiber transceiver or SFP module)
¡@ |
Environment |
Temperature |
Operating: 0~50 Degree C
Storage -10~70 Degree C
¡@ |
Humidity |
Operating: 10~90%,
Storage: 5~95% (Non-condensing) |