PS4110XV 3
PS4110XV 3.5"
¡@
¡@
Product Configurations
Storage Controllers
Dual controllers, each with 4GB1 memory
for PS-Series firmware. Each controller provides cache to flash for data
protection.
¡@
Hard Disk Drives
Twelve (12) 15K SAS hot-pluggable hard drives. (Six (6) drive configuration
available. Please contact your Dell Sales Representative for details.)
¡@
Drive Capacities
3.5" 15,000 RPM SAS drives available in 600GB1
¡@
System Capacities
3.6TB1 using
six (6) 600 GB1 15,000
SAS disk drives
7.2 TB1 using
twelve (12) 600 GB1 15,000
SAS disk drives
Technical Highlights
Volumes
Up to 256
¡@
Snapshots
128 per volume / up to 2,048 total
¡@
Hosts Accessing PS Series Group
Up to 512 per pool / 1024 per group
¡@
Host Protocol
Any standards-compliant iSCSI initiator
¡@
Operating Systems Supported
¡@
Windows® 2000
Server
Windows Server® 2003
Windows Server® 2008,
including Hyper-VTM
Windows Server® 2008
R2, including Hyper-VTM
Windows Vista®
Windows XP®
VMware® ESX
Server 3 / 3.5 / 4 / 4.1/ 5 ESXi 3.5 / 4 / 4.1 / 5
Citrix® XenServerTM
Red Hat® Enterprise
Linux®
SUSE® Linux
Enterprise
SunTM Solaris
IBM® AIX
HP-UX
Mac OS® X
Novell® Netware®
¡@
RAID Support
Automatic RAID 5, RAID 6, RAID 10 and RAID 50
¡@
Network interfaces
10GbE connectivity with one (1) 10GBASE-T with RJ45, one (1)
10GbE SFP+ for fibre or twin-ax copper cabling, and one (1)
100BASE-TX dedicated management port per controller
TCP Network Support
IPv4, IPv6 core support
¡@
Expansion Option
Can be combined with other EqualLogic PS Series arrays in the same SAN group,
online. A maximum of two (2) PS4000, PS4100, and PS4110 Series arrays can be in
a group.
Reliability
Redundant, hot-swappable controllers, power supplies / cooling fans, and
hot-swappable disks
Vertical port sharing
Individual disk drive slot power control
Enclosure Monitoring System
Automatic spare configuration and utilization
SMART
Automatic bad block replacement
Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk
drives
Management Interfaces
SAN Headquarters (SANHQ)
multi-group performance and event monitoring tool
SNMP, telnet, SSH, HTTP, Web (SSL), host scripting
Serial console
Multi-administrator support
Ability to configure a separate management network
¡@
Security
CHAP authentication
Access control for iSCSI
Access control for management interfaces including RADIUS support
Notification Methods
SNMP traps, e-mail, syslog
Power
AC voltage: 100-240 VAC +10% single phase
Frequency: 50/60 Hz
Power factor: 0.98 (minimum)
700W (max, total), +5V up to 155W; +12V up to 624W; +5Vsb up to 10W
Power supplies: Dual 700W
Environmental
Temperature Range: 5¢X to 40¢XC (41¢X to 104¢XF)
Storage Temperature: -40¢X to 65¢XC (-40¢X to 149¢XF)
For altitudes above 2950 feet, the maximum operating temperature is derated
1¢XF/550 ft
Operational Relative Humidity: 20% to 80% (noncondensing) with a maximum
humidity gradation of 10% per hour
Operational Shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms
+/- 10% in operational orientations only
Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational
orientations
Acoustics Category 4: <=7.2 bels at 23C +/- 2C
Air Quality: Airborne contaminant level of G1 or lower as defined by
ISA-S71.04-1985
Physical
Height: 2U/8.68 cm (3.41 inches)
Width: 44.63 cm (17.57 inches)
Depth: 59.4 cm (23.4 inches)
Weight: 27.67 kg (61 lb)
¡@
¡@