Hardware Specifications |
Copper Ports |
LAN: 5 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 1 to Port 5,
bridge mode)
WAN: 1 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 5, gateway mode)
¡@ |
PoE Injector Port |
4 ports with 802.3af/802.3at PoE injector function (Port 1 to Port
4) |
USB |
1 USB Type A female for setting backup |
Power Output |
4 PoE out 51VDC; max. 30 watts per PoE port
2 DC out 24@ 1A maximum (four-pin terminal block)
* The voltage of DC out is based on the battery.
¡@ |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
10Gbps/non-blocking |
Switch Throughput@64 bytes |
5.95Mpps@64 bytes |
MAC Address Table |
8K entries |
Shared Data Buffer |
512Kbit |
Flow Control |
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
¡@ |
Reset Button |
< 5 sec: System reboot
> 5 sec: Factory default
¡@ |
LED |
3 LEDs for System and Power:
¡@
- Green: Power
¡@
- Green: Fault
¡@
- Green: System
4 LEDs for PoE Copper Ports (Port 1~Port 4):
¡@
- Green: LNK/ACT
¡@
- Orange: PoE-in-use
1 LED for 10/100/1000T Copper Port (Port 5):
¡@
3 LEDs for PoE Power Usage (W)
¡@
|
Connector |
Removable 6-pin terminal block
Pin 1/2 for PV panel; Pin 3/4 for alarm; Pin 5/6 for battery
¡@ |
Alarm |
1 Digital Output (DO):
Level 0: -24V~2.1V (¡Ó0.1V)
Level 1: 2.1V~24V (¡Ó0.1V)
Open collector to 24V DC, 100mA max.
¡@ |
Power Requirements |
PV in: 24~45V DC
Battery in/out: 24V DC
¡@ |
Power Consumption/
Dissipation |
5.04 watts, 17.1BTU (Standby without PoE function)
6.96 watts, 23.7 BTU (Full loading without PoE function)
135.36 watts, 461.5 BTU (Full loading with PoE function)
¡@ |
Dimensions (W x D x H) |
84 x 107 x 152 mm |
Weight |
1026g |
ESD Protection |
6KV DC |
Enclosure |
IP30 aluminum case |
Installation |
DIN-rail kit and wall-mount ear |
Power over Ethernet |
PoE Standard |
IEEE 802.3af/802.3at Power over Ethernet PSE |
PoE Power Supply Type |
End-span |
PoE Power Output |
Per port 51V DC, 275mA. Max. 15.4 watts (IEEE 802.3af)
Per port 51V DC, 535mA. Max. 30 watts (IEEE 802.3at)
¡@ |
Power Pin Assignment |
1/2 (+), 3/6 (-) |
PoE Power Budget |
120 watts (PoE consumption + DC out and depending on power input) |
Max. Number of Class 2 PDs |
4 |
Max. Number of Class 3 PDs |
4 |
Max. Number of Class 4 PDs |
4 |
Electrical Characteristics |
System Voltage Rating |
24V DC |
Maximum Charging Current |
6A |
Max. Solar Array VOC |
60V DC |
Max. Operating Voltage |
45V DC |
Total Current Consumption |
While operating -32mA
At idle -11mA
¡@ |
High Temperature Shutdown |
100 degrees C disconnect solar and load
80 degrees C reconnect solar and load
¡@ |
Battery Charging Characteristics |
Charge Algorithm |
Bulk charge (constant current), Absorption charge (constant voltage)
and Floating charge. Absorption and Floating charge with PWM protection. |
Maximum Output Current |
6A |
Nickel-cadmium Battery |
¡Ó 40 mV/degrees Celsius for NiCad type batteries; charge cut-off @
55 degrees C
(Temperature compensation baseline@ 25 degrees C)
¡@ |
Lead Acid Battery (Default
Setting) |
¡Ó 60 mV/degrees Celsius for lead acid type batteries; charge cut-off
@ 55 degrees C
(Temperature compensation baseline@ 25 degrees C)
¡@ |
Float Charge Voltage |
DC 27.2V (26.0~30.0V) |
Absorption Charge Voltage |
DC 29.2V (28.0~32.0V) |
LVD (Low Voltage
Disconnection) |
DC 22.2V (21.0~25.0V) |
LVR (Low Voltage
Reconnection) |
DC 24.8V (23.0~27.0V) |
Router Features |
Internet Connection Type |
Shares data and Internet access with users, supporting the following
internet accesses:
¡@
- PPPoE
¡@
- Dynamic IP
¡@
- Static IP
¡@
- PPTP
¡@
- L2TP
|
Firewall |
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Port Forwarding, and DMZ
Built-in firewall with IP address/MAC address/Port/ URL filtering
Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS protection
¡@ |
Routing Protocol |
Static/Dynamic (RIP1 and 2) routing |
VPN Pass-through |
PPTP, L2TP, IPSec, IPv6 |
LAN |
Built-in DHCP server supporting static IP address distribution
Supports UPnP, Dynamic DNS
Supports IGMP Proxy
Supports 802.1d STP (Spanning Tree)
IP/MAC-based bandwidth control
¡@ |
Management |
Management Interface |
Setup of system/management functions
Web firmware upgrade
SNMP trap for alarm notification of events
¡@ |
PoE Management |
Power limit by consumption and allocation
PoE admin mode
Per port power schedule
Per port power enable/disable
Power feeding priority
Current per port usage and status
Total power consumption
PD alive check
Scheduled power recycling
¡@ |
Battery Management |
Battery current usage and status
Battery capacity statistics
Low Voltage Cut-Off Protection
¡@ |
Standards Conformance |
Regulatory Compliance |
FCC Part 15 Class A, CE |
Standards Compliance |
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.1D Spanning Tree Protocol
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 768: UDP
RFC 791: IP
RFC 2068 HTTP
RFC 1157: SNMP v1
RFC 1902: SNMP v2c
RFC 5424: Syslog
¡@ |
Environment |
Operating |
Temperature: -10 ~ 60 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
¡@ |
Storage |
Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing) |
Ordering Information |
BSP-360 |
Industrial Renewable Energy 4-Port 10/100/1000T 802.3at PoE+ Managed
Ethernet Switch |